<label id="aihr5"></label>
    <thead id="aihr5"></thead>

      <thead id="aihr5"><optgroup id="aihr5"></optgroup></thead>
    1. <label id="aihr5"><meter id="aihr5"></meter></label>

        撥號18861759551

        你的位置:首頁 > 技術文章 > Optical Flats

        技術文章

        Optical Flats

        技術文章

        Optical Flats

        PRECISION OPTICAL FLATS

        An optical flat is a precisely polished flat surface, used as a reference against which the flatness of an unknown surface may be compared. Edmund Optics offers both single surface and dual surface optical flats in either ZERODUR® or Fused Silica. The flatness of an optical flat is measured in fractions of a reference wavelength, 632.8nm. A λ/20 flat will have a maximum peak to valley deviation of 632.8/20 or 31.64nm. We offer several levels of flatness for our single surface flats: λ/4, λ/10, and λ/20. For our dual surface flats, ¼, 1/10 and 1/20 flatness are available.

         

        WHAT AN OPTICAL FLAT SHOWS

        When an optical flat's polished surface is placed in contact with a surface to be tested, dark and light bands will be formed when viewed with monochromatic light. These bands are known as interference fringes and their shape gives a visual representation of the flatness of the surface being tested. The surface flatness is indicated by the amount of curve and spacing between the interference fringes. Straight, parallel, and evenly spaced interference fringes indicate that the work surface flatness is equal to or higher than that of the reference surface.

         

        APPLICATIONS

        Measurement of the surface flatness of polished surfaces can be determined visually by comparing the variations between a work surface and the surface of an optical flat. Optical flats are versatile optical components used in many applications, such as: inspection of gauge blocks for wear and accuracy, as well as the testing of various components including windows, prisms, filters, mirrors, etc. They can also be used as extremely flat optical windows for demanding interferometry requirements.

         

        HOW AN OPTICAL FLAT WORKS

        Figure 1: How an Optical Flat Works

         

        An optical flat utilizes the property of interference to exhibit the flatness on a desired surface. When an optical flat, also known as a test plate, and a work surface are placed in contact, an air wedge is formed. Areas between the flat and the work surface that are not in contact form this air wedge. The change in thickness of the air wedge will dictate the shape and orientation of the interference bands. The amount of curvature that is shown by the interference bands can be used to determine the flatness of the surface. If the air wedge is too large, then many closely spaced lines can appear, making it difficult to analyze the pattern formed. Simply applying pressure to the of the optical flat alleviates the problem.

         

        The determination of the flatness of any particular region of a surface is done by making two parallel imaginary lines; one between the ends of any one fringe, and the other at the of that same fringe. The number of fringes located between the lines can be used to determine the flatness. Monochromatic light is used to create sharp contrast for viewing and in order to specify the flatness as a function of a single wavelength.

         

        WHICH ACCURACY SHOULD BE USED - λ/4, λ/10, λ/20

        This is a commonly asked question and the answer is dependent on what is being tested. If the surface that is being tested is flatter than λ/4, then a more precise flat will be required to show a change in the interference pattern. In this case, a λ/4 flat would exhibit straight parallel lines, but λ/10 or λ/20 flats would show enough curvature in the fringes to measure the surface accuray.

         

        WHAT MATERIALS SHOULD BE USED - FUSED SILICA OR ZERODUR®?

        Fused Silica: We use a clear optical fused silica, which has a very low thermal expansion of 0.55 x 10-6 per °C. Being highly durable and having good resistance to abrasion makes fused silica a good choice for applications that are high in wear and tear. Full mechanical, thermal, electrical, and chemical specifications are available.

         

        ZERODUR®: Yellow tinted ZERODUR® is a clear glass ceramic developed by Schott Research Labs. ZERODUR® exhibits an extremely low thermal expansion of ±0.10 x 10 -6 per °C. In applications where temperature fluctuation is a concern, ZERODUR® offers a thermal stability that is unmatched. Full mechanical, thermal, electrical, and chemical specifications are available.

         

        OPTICAL FLAT CERTIFICATION

        Figure 2: Optical Flat Certification of Calibration

         

        The primary surface of all Edmund Optics optical flats is precision ground and polished to the stated flatness and is tested and certified on our Zygo GPI-XP Interferometer. The secondary surface of our single surface flats is pitch polished to window quality only for viewing the interference pattern. Each flat comes with a certificate of calibration (λ/20 only) and its own storage case for permanent protection.

         

        In-House Interferometric Testing

        Each optical flat and plano precision mirror is tested for flatness error using our Zygo GPI-XP Interferometer. With the aid of the interferometer and other precision testing equipment, Edmund Optics is able to provide and ensure the highest quality optics.

         

        RECALIBRATION

        Please note that over time and with repeated use, optical flats can lose their degree of precision. Our Optical Lab can recalibrate and recertify our flats for a fee. For full details on our optical flat recertification, please contact our Sales Department.

        聯系我們

        地址:江蘇省江陰市人民東路1091號1017室 傳真:0510-68836817 Email:sales@rympo.com
        24小時在線客服,為您服務!

        版權所有 © 2025 江陰韻翔光電技術有限公司 備案號:蘇ICP備16003332號-1 技術支持:化工儀器網 管理登陸 GoogleSitemap

        在線咨詢
        QQ客服
        QQ:17041053
        電話咨詢
        0510-68836815
        關注微信
        主站蜘蛛池模板: 国产成人麻豆亚洲综合无码精品| 中文字幕亚洲综合久久| 伊人成色综合网| 亚洲狠狠成人综合网| 亚洲综合av永久无码精品一区二区| 久久综合伊人77777| 亚洲欧美日韩国产综合| 激情伊人五月天久久综合| 欧美成人综合视频| 久久综合精品国产一区二区三区 | 亚洲人成网站999久久久综合 | 色欲色香天天天综合网站| 狠狠人妻久久久久久综合蜜桃| 综合激情五月综合激情五月激情1| 亚洲中文字幕无码久久综合网| 天天av天天翘天天综合网 | 亚洲国产综合专区在线电影| 亚洲日本国产综合高清| 天天做天天爱天天综合网| 欧美综合视频在线| 色综合久久天天综线观看| 色婷婷综合久久久久中文一区二区 | 亚洲VA欧美va国产va综合| 欧美在线观看综合国产| 亚洲综合自拍成人| 91精品欧美综合在线观看| 色综合视频一区二区三区| 色综合久久久久网| 91欧美一区二区三区综合在线 | 亚洲婷婷五月综合狠狠爱| 国产成人无码综合亚洲日韩| 狠狠色狠狠色综合曰曰| 亚洲日本国产综合高清| 狠狠色丁香婷婷综合激情| 一日本道伊人久久综合影| 一本久久a久久精品综合香蕉| 欧美亚洲综合另类成人| 五月综合激情婷婷六月色窝| 区三区激情福利综合中文字幕在线一区亚洲视频1 | 亚洲国产一成久久精品国产成人综合| 国产精品激情综合久久|